工作內容：
1. Support on internal quality issues investigation, analysis and solving, Resp. for containment action and block for internal failure parts.
支持內部質量問題的調查、分析及解決; 負責內部生產的可疑產品的圍堵及封存。
2. Contact window to PUQ for material incoming problems, and follow up problem solving of suppliers side in production dept.; Tacking incoming quality improvement
來料問題：作為生產部門和PUQ部門的接口，并在生產內部負責跟蹤供應商對問題改進的跟進。將供應商質量問題反饋給供應商質量管理工程師，并跟蹤改進結果
3. Statistics quality data (eg. Internal Defect Cost, PPM) and make summary and analysis report for developing quality status.
統計質量數據并且制作分析報表，為制定質量改進方法提供依據，以便更好的提高生產質量；
4. Take part in PFMEA, support on problem prevention
參與分析PFMEA，協助工藝工程師制定改進措施,來預防問題的發生
5. Following up internal continuous quality improvement status, eg.: PSS project, internal 8Dstatus
跟進內部持續改善項目的進展，如：內部PSS項目，內部8D完成情況
6. Other tasks assigned by superior.
上級指派的其他任務。
任職資格：
1. Bachelor in mechanical/electrical engineering
機械/電氣工程學士
2. 3-5 years working experience as process-/or quality engineer in manufacturing
3-5年在生產領域內的工藝工程師/質量工程師工作經驗
3. MS-Office, wide-spread technical basic knowledge, PFMEA, MSA, Cmk, Cpk. 8D
MS-Office, 通用技能基礎知識, PFMEA, MSA, Cmk, Cpk, 8D
4. Ability to communicate in English.
能用英語溝通